All the connectors are on the front panel. There are lines on the panel that outline groups of connectors.
Fiber Optic or hard wire connection between this SDU and the Universal
Radio System Control boxes can be used. When the FO link is used
the Battery needs to be switched on. When the hard wire
connection is made the battery can be switched off since power is also
supplied by the cable.
Remote
URSC-1 Universal Radio System Control # 1
This is the fiber optic connection between the main system and the control head.
J1: Fiber Optic - Dual Connector
J8: Power - small 5 sockets
USRC-2Universal Radio System Control #2
This is the fiber optic connection between the main system and the control head.
J2: Fiber Optic - Dual Connector
J9: Power - small 5 sockets
Four Radios
There will be two cables between each
radio and the SDU. One carries the audio or data and is the U-229
connector and the other is the control cable for the radio.
VHF-FM
This would be one of the vehicle mounted tatical FM radios like the
RT-524,
RT-1439 SINCGARS, RT-1523()
SINCGARS
J3: U-229 type 6 contact
J11: big circular con many sockets
HF
The HF radio is the GRC-193() system that uses:
RT-1209 (part of the PRC-104) with the RT-1444 Remote Control adapter
AM-6879 Audio Amplifier-RTTY Converter
AM-6545A/GRC-193A Amplifier 100 or 400 Watts Harris
CU-2064 Antenna Coupler Harris
J5: U-229 type 6 contact
J10: big circular con many sockets
VHF-AM
This aircraft radio is the VRC-83 which uses the:
RT-1319/PRC-113
AM-7176 RF Amp
VRC-83
vehicle mount (MT-?)
J6: U-229 type 6 contact
J12: big circular con many sockets
UHF-AM
This aircraft radio is the VRC-83 which uses the:
RT-1319/PRC-113
AM-7176 RF Amp
VRC-83
vehicle mount (MT-?)
J7: U-229 type 6 contact
J13: big circular con many sockets the
O1814 is between the radio and the SDU.
AM-1780
This connector is for the
Vehcile Inter Communication (VIC).
J4: U-229 type 6 contact
PDU
I think this is the POWER input to the SDU which comes from the PDU SB-4151/GRC-206 probably from J1 or J2.
J14: 3 male pins circular
The power cable that I made up to power the
O-1814 RFO fits this jack and can be used to power the SDU.
Back to Brooke's [an error occurred while processing this directive] page created 8 Dec 2008.